|
4258 |
Click on the above
image for a full
view ... |
|
| A stripper which removes the inner and outer sheath of co-axial cables simultaneously. An allen key is provided to set the blades to suit your cable. Cables from 4mm to 7mm outside diameter can be accommodated. The tool is set at the factory to suit RG58 and RG59 cable. To change from one to the other the die is reversed in the tool. To operate, squeeze to open the jaws, then place the cable on the cable guide and close the jaws. Insert a finger in the loop on the tool and revolve the tool around the cable four to five times. Then holding the tool, pull the cable firmly out of the tool. Both the inner and outer will be neatly trimmed away leaving the cable ready for connection.Overall size: 104x34x22mm. |
|
